Y27-500KS框架式精密伺服數控液壓機

特點：主機機身采用框架式結構，工作方式選擇：有調整、半自動（單次循環）兩種工作規范，有定壓成型與定程成型兩種成型方式。液壓機上梁、滑塊與油缸接合處等設置了擋油措施。結構件經先進設備進行精加工，保證了整體機身外觀平整美觀、精度高、剛性好。工作臺尺寸應與沖壓模具尺寸配合設計制作，工作臺孔徑T形槽及布局應與沖壓模具尺寸配合設計制作?；瑝K為全鋼板焊接箱型結構，滑塊行程400，滑塊設有位移傳感器發訊裝置和行程極限限位裝置，能有效防止超程。液壓系統低壓大通徑管道有柔性接頭隔震，通徑32 以上的管道均采用法蘭式連接，耐震、防漏性能好；液壓油工作油溫不得超過50±5℃，需進行防凝露滴水處理

peculiarity：The body of the main machine adopts a frame structure, and the working mode is selected: there are two kinds of working specifications: adjustment, semi-automatic (single cycle), and there are two kinds of forming methods: constant pressure forming and fixed process forming. Oil blocking measures are provided at the joints of the upper beam, slide block and oil cylinder of the hydraulic press. The structural parts are finished by advanced equipment to ensure the appearance of the whole fuselage is smooth and beautiful, high precision and good rigidity. The size of the table should be designed and made in accordance with the size of the stamping die, and the T-slot and layout of the table aperture should be designed and made in accordance with the size of the stamping die. The slide block is all steel plate welded box structure, the slide block stroke is 400, and the slide block is equipped with displacement sensor signaling device and travel limit limiting device, which can effectively prevent overtravel. Hydraulic system low pressure large-diameter pipe with flexible joint vibration isolation, diameter of more than 32 of the pipe are used flange connection, vibration resistance, leakage resistance is good; The working oil temperature of hydraulic oil shall not exceed 50±5℃, and anti-condensation dripping treatment shall be carried out.
?

狀態：

數量：



詢價加入詢價籃

型號：
Y27-500KS框架式精密伺服數控液壓機
產品品牌：
萬達

產品描述

產品描述

Y27-500KS框架式精密伺服數控液壓機現場圖Y27-500KS Frame type precision servo CNC hydraulic press site picture：

Y27-500KS框架式精密伺服數控液壓機技術參數Y27-500KS frame type precision servo CNC hydraulic press technical parameters：

序號 NO.	項目 Item		單位 Unit	Y27-500KS
1	主缸力Master cylinder force		KN	5000 (可調)(adjustable)
2	液體工作壓力 Maximum working pressure of liquid		MPa	25
3	主缸行程 Master cylinder stroke		mm	400(可調) (adjustable)
4	液壓墊力Hydraulic cushion force		KN	2000(可調)(adjustable)
5	液壓墊行程Hydraulic pad stroke		mm	180(可調) (adjustable)
6	滑塊開口高度 Maximum opening height of the slider		mm	1100
7	滑塊速度 Slider speed	空載下行No-load down	mm/s	300(可調) (adjustable)
		拉伸stretch	mm/s	11-22(可調(adjustable)
		回程returning	mm/s	280(可調) (adjustable)
8	液壓墊速度Hydraulic pad speed	頂出ejection	mm/s	150
8	液壓墊速度Hydraulic pad speed	退回Send back	mm/s	150
9	工作臺尺寸 Table size	左右left-right	mm	1100
9	工作臺尺寸 Table size	前后front-back	mm	1000
10	頂桿孔布置 Ejector hole layout	左右left-right	列數 Number of columns	7
		前后front-back	排數 Row number	7
		孔心距Pit-center distance	mm	100*100
		孔徑aperture	mm	￠40
		孔數Hole number	mm	25
11	T型槽分布 T-slot distribution	規格specification	mm	28
12	制冷方式Refrigeration mode		油冷機Oil cooler
13	伺服電機功率Servo motor power		KW	40.9
14	普通電機功率 Ordinary motor power		KW	11

8.1

上一條:

下一條:

Y27-500KS框架式精密伺服數控液壓機

產品分類

快速鏈接

我們的產品

聯系我們